|AC power input:||100-230V 50/60Hz|
|Power Consumption Standby:||0.3W|
|Power Consumption Max:||94W|
|Frequency Response (±3dB):||45Hz - 23kHz|
|Box Principle:||Bass Reflex Rear Ported|
|Crossover:||2 way DSP based|
|Crossover Slope:||2nd order|
|Tweeter:||28mm soft dome|
|Amplifier Power:||2 x 50W|
|Weight:||6.4kg / 14lb|
|Dimensions (W x H x D):||170 x 282 x 246mm|
|6.7 x 11.1 x 9.7in|
|Dimensions with feet/grill (W x H x D):||170 x 282 x 262mm|
|6.7 x 11.1 x 10.3in|
|Analog Inputs:||1x RCA per speaker (unbalanced) 1x XLR per speaker (balanced)|
"They’re snappy and swift too – fleeting through songs with rhythmic precision and explicit timing – but they exercise control at every turn."
Powerful digital amplifiers, proprietary Dynaudio drivers and advanced digital sound processing. All you need is a source
If you want to go active, there’s the X14A. It’s based on the passive model, but contains its own powerful digital amplification – one 50W amp for the tweeter and another for the mid/bass driver. We’ve matched each amp specifically to the driver it powers, so you don’t have to worry about system-matching or interconnects, and you can even tell the speakers where they are in the room (in a corner, in free space and so on) to let them fine-tune their sound for you. All you need is a source.
Want more? The high-pass filter (60 or 80 Hz) allows one to optionally combine the Excite X14A with a subwoofer. With the high pass filter engaged, lower bass frequencies will be filtered out to be covered by a dedicated sub such as the Dynaudio Sub 250 II.